Off-line simulation of robot welding of radar pedestal
摘要：A study of the interference simulation based on robot welding of the radar pedestal was carried out by using the KUKA Sim Pro simulation software and off-line program technology. Compared with the actual robot welding process, it was found that the trajectory of the simulated robot welding process in line with that recorded in the actual welding process, and the actual limit and interference appeared at the same place as the simulation process. There was no interference phenomenon on the outside weld-seam; on the internal weld-seam, especially on the weld-joint of support plate connected to the cylinder, a phenomenon of interference appeared. It was helpful to use the simulation method to guide the actual robot welding so as to protect robot from impacting and reduce the weld defects.
重慶大學學報雜志要求:
{1}來稿請寫明作者真實姓名、職稱或職務、工作單位、詳細地址、郵編、電話號碼和E-mail。以集體名義寫的文章，請注明執筆者或聯系人，以便聯系。
{2}有嚴謹?shù)目茖W(xué)性和邏輯性，有理論或?qū)嶋H意義。論點明確，資料可靠，數據無誤，文字精煉，層次清楚，書寫工整規范。
{3}題名：簡明確切地反映論文的特定內容，一般不超過30字，不得使用不常見的外來語、縮寫詞、符號、代號和商品名稱,盡可能不出現數學式和化學式。
{4}按GB/T 7714-2005《文后參考文獻著錄規則》，采用順序編碼制著錄，依照其在文中出現的先后順序用阿拉伯?dāng)?shù)字加方括號標在右上角。
{5}關鍵詞：3-5個，以分號相隔。應盡量使用敘詞，無法用敘詞的則應根據文章內容合理提取反映主題的自由詞。
注：因版權方要求，不能公開全文，如需全文，請咨詢雜志社
